2400331 - 3310A14 FRONT DISC BRAKES - R.R.

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Proceed with removal  - 4450B12  front or rear wheels (two) - r+r Proceed with removal  - 3310A32  FRONT BRAKE CALIPERS - R.R.1. Undo the bolts (1a) and remove the front brake caliper brackets (1b).
1. Unscrew the bolts (1a) and remove the front brake discs (1b).
Refitting ( Removing ) 1. Refit the front brake discs (1a) in their seatings and tighten the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bPinFRONT BRAKE DISC.M8(Wheel hub side) 1.0 ÷ 1.4
1. Place the front brake caliper brackets (1a) back in their housings and fix them tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltFRONT BRAKE CALIPER BRACKETM12(Stub axle side) 10.0 ÷ 11.0
Proceed with refitting  - 3310A32  FRONT BRAKE CALIPERS - R.R. . Proceed with refitting  - 0010T64  brake and or clutch fluid check level and top up as necessary . Proceed with refitting  - 0010T65  hydraulic brake system bleed air . Proceed with refitting  - 4450B12  front or rear wheels (two) - r+r . Connect the negative (-) battery terminal.Remove the car from the ramps.