2400364 - 3330E34 Intermediate FLEXIBLE PIPE (one), left or right, to rear brakes - R.R.

Removing ( Refitting ) Position the vehicle on the ramp FOR THE LEFT FLEXIBLE PIPE, proceed with the removal  - 4450B06  left rear wheel r r . FOR THE RIGHT FLEXIBLE PIPE, proceed with the removal  - 4450B08  right rear wheel r r . 1. Remove the protective cap from the bleed screw for the rear brake cylinder.2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. 3. Loosen the bleed valve on the rear brake cylinder.Wait for the brake-clutch reservoir to drain.
1. Remove the retaining clips.2. Under connectors (2a) and (2b) using tool (2c).

NameCountry
2cBox wrench for brake fittings1.856.132.000
3. Remove the intermediate hose to the rear brakes.
Refitting ( Removing ) 1. Refit the intermediate hose to the rear brakes (1a) and tighten connectors (1b) to the specified torque using tool (1c).

FasteningComponentØValue(daNm)
1bConnectorREAR BRAKE INTERM HOSE-(Rigid pipe side) 1.4 ÷ 1.8

NameCountry
1cBox wrench for brake fittings1.856.132.000
2. Refit the retaining clips in their seats.
Proceed with refitting  - 0010T64  brake and or clutch fluid check level and top up as necessary . Proceed with refitting  - 0010T65  hydraulic brake system bleed air . FOR THE LEFT FLEXIBLE PIPE, proceed with the refitting  - 4450B06  left rear wheel r r . FOR THE RIGHT FLEXIBLE PIPE, proceed with the refitting  - 4450B08  right rear wheel r r . Remove the car from the ramps.