3340B55 CENTRAL BRAKE PIPE TO LH - R R - Fiat - IDEA - eLearn

2400380 - 3340B55 central brake pipe to lh - r r

) Position the vehicle on the ramp Proceed with removal - 5530B10 battery - r+r Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. Proceed with removal Proceed with removal - 4450B02 left front wheel r r Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. Proceed with removal - 3340B52 pump/central obs pipe - r r1. Disconnect the electrical connection from the ABS electronic control unit.

	Name	Connector
1	ABS control unit	M50

1. Undo the connectors (1a) and disconnect the rigid brake pipes (1b) from the A.B.S. hydraulic and electronic control unit.

1. Withdraw the retaining clips2. Undo the connector (2a) and disconnect the rigid pipe from the hydraulic unit to the left right brake (2b), hose side, using tool (2c)

	Name	Country
2c	Box wrench for brake fittings	1.856.132.000

3. Release the rigid pipe from the hydraulic control unit to the left front brake from the fastenings.

1. Working in the wheel compartment, remove the rigid pipe from the hydraulic unit to the left front brake.

Refitting ( Removing

) Place in its seating the rigid pipe from the hydraulic unit to the front left brake and secure it with its fastenings.1. Connect the rigid pipe from the hydraulic control unit to the front right brake (1a), flexible pipe side, and tighten the connector (1b) to the recommended torque using tool (1c).

	Fastening	Component	Ø	Value(daNm)
1b	-	PIPE FROM CONTROL UNIT TO FRONT BRAKES	-	(Flexible pipe side) 1.4 ÷ 1.8

	Name	Country
1c	Box wrench for brake fittings	1.856.132.000

2. Refit the retaining clip in its seat.

1. Connect rigid brake pipes (1a) to the A.B.S. hydraulic and electronic control unit and tighten the connectors (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	BRAKE SYSTEM FITTINGS	M10/M12	(A.B.S.) control unit side 1.4 ÷ 1.8

Connect the electrical connection to the A.B.S. electronic control unit. Proceed with refitting - 3340B52 pump/central obs pipe - r r . Proceed with refitting - 0010T64 brake and or clutch fluid check level and top up as necessary . Proceed with refitting - 0010T65 hydraulic brake system bleed air . Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with refitting - 4450B02 left front wheel r r . Proceed with refitting . Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting - 5530B10 battery - r+r . Remove the car from the ramps.