2400384 - 3340B76 rigid pipe(one), lh or rh, to rear brake cylinder - r r

Removing ( Refitting ) Position the vehicle on the ramp FOR THE LEFT RIGID PIPE, proceed with the removal  - 4450B06  left rear wheel r r . FOR THE RIGHT RIGID PIPE, proceed with the removal  - 4450B08  right rear wheel r r . 1. Remove the protective cap from the bleed screw for the rear brake cylinder.2. Connect the collection system (pipe and reservoir) to the bleed valve on the rear brake cylinder.3. Loosen the bleed valve on the rear brake cylinder.Wait for the brake-clutch reservoir to drain.
1. Undo the connectors (1a) and (1b) using wrench (1c), then remove the rigid pipe to rear brake cylinder (1d).

NameCountry
1cBox wrench for brake fittings1.856.132.000
Refitting ( Removing ) 1. Refit the rigid pipe from rear brake cylinder (1a) and secure by tightening connectors (1b) and (1c) to the specified torque using wrench (1d).

FasteningComponentØValue(daNm)
1bConnectorRIGID PIPE REAR CYLINDERS (ABS)-(Flexible pipe side) 1.4 ÷ 1.8

FasteningComponentØValue(daNm)
1cConnectorRIGID PIPE REAR CYLINDERS (ABS)-(Rear brake shoe cylinder side.) 1.4 ÷ 1.8

NameCountry
1dBox wrench for brake fittings1.856.132.000
Proceed with refitting  - 0010T64  brake and or clutch fluid check level and top up as necessary . Proceed with refitting  - 0010T65  hydraulic brake system bleed air . FOR THE LEFT RIGID PIPE, proceed with the refitting  - 4450B06  left rear wheel r r . FOR THE RIGHT RIGID PIPE, proceed with the refitting  - 4450B08  right rear wheel r r . Remove the car from the ramps.