3350E31 SENSOR FOR LONGITUDINAL ACCELERATION (HILL HOLDER) - R.R . - Fiat - IDEA - eLearn

2400389 - 3350E31 SENSOR for longitudinal acceleration (hill holder) - R.R .

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 3380A44 handbrake/linkage protection - r+r Proceed with removal - 7040L20 tunnel trim - r r1. Disconnect the electrical connection from the hill holder longitudinal sensor.2. Undo the nuts (2a) and remove the hill holder longitudinal acceleration sensor (2b).

Refitting ( Removing

) Refit the hill holder longitudinal acceleration sensor and secure with nuts.Connect the hill holder longitudinal acceleration sensor electrical connection. Proceed with refitting - 7040L20 tunnel trim - r r . Proceed with refitting - 3380A44 handbrake/linkage protection - r+r . Connect the negative (-) battery terminal.Calibrate the longitudinal acceleration sensor following the procedure indicated by the Examiner test station.