2400400 - 4110A46 INTERMEDIATE SHAFT CONNECTED TO STEERING BOX - R.R.

Removing ( Refitting ) Proceed with removal  - 7040L37  gear lever plate - r r Proceed with removal  - 7040A65  passenger compartment box lock , one , r r Proceed with removal  - 7040A19  cushion padding - r r Proceed with removal  - 7040A28  TRIM on gearbox control panel - R.R. Proceed with removal  - 7040A30  Left instrument panel lower TRIM - R.R. Proceed with removal  - 5580C18  air bag module - r+r
Closely observe the safety regulations established for this operation.  See assembly 5580C   air bag system
Proceed with removal  - 4110A11  steering wheel - r+r for replacement or check for versions with air bag Proceed with removal  - 5550A12  complete stalk unit - r+r for versions with air bag Proceed with removal  - 4110D20  steering electrical control device - r r1. At the bench, undo the bolt (1a) and remove the intermediate shaft connected to the steering box (1b).
Refitting ( Removing ) Place the intermediate shaft connected to the steering box back in its housing and secure it tightening the bolt to the recommended torque.
The intermediate shaft fork must be inserted fully in the electric steering device output shaft only after the lock nut has been withdrawn from its seating. The bolt must be inserted correctly inside its seating after the fork has been fitted in the output shaft of the electric steering device. If the intermediate shaft fork is not correctly fitted on the output shaft or the bolt is not correctly positioned in its seating, these components could become disconnected and there could be a loss of steering.

FasteningComponentØValue(daNm)
-----
Proceed with refitting  - 4110D20  steering electrical control device - r r . Proceed with refitting  - 5550A12  complete stalk unit - r+r for versions with air bag . Proceed with refitting  - 4110A11  steering wheel - r+r for replacement or check for versions with air bag . Proceed with refitting  - 5580C18  air bag module - r+r . Proceed with refitting  - 7040A30  Left instrument panel lower TRIM - R.R. . Proceed with refitting  - 7040A28  TRIM on gearbox control panel - R.R. . Proceed with refitting  - 7040A19  cushion padding - r r . Proceed with refitting  - 7040A65  passenger compartment box lock , one , r r . Proceed with refitting  - 7040L37  gear lever plate - r r .