2400589 - 5540B25 dipped headlamp beam (1), lh or rh - r r

Removing ( Refitting ) Open the bonnet lid.1. Turn the cover retainer.2. Remove cover (2a), releasing the retainers (2b). 1. Release the retaining clips.2. Extract the bulb holder with the bulb.3. Extract the bulb from the bulb holder.

If the lamp is working properly, avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

Refitting ( Removing ) Check the condition and the cleanliness of the lamp.

Avoid touching the bulb with your hands If this does happen, clean the bulb with alcohol.

1. Fit the bulb in the bulb holder and fit the bulb holder by engaging the retaining tabs. Correct bulb position is shown in the figure. Position the cover and attach the retainers.Check the operation of the bulb.