2400614 - 5550D22 reversing light switch - r+r
Removing
(
Refitting
)
Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-). 
| Name | Connector |
|---|
| - | Battery | A1B |
1. Disconnect the electrical connection from the reversing lights
switch.
| Name | Connector |
|---|
| 1 | Reversing lights switch | I20 |
2. Undo and remove the reversing lights switch.
Refitting
(
Removing
)
Fit the reversing switch and tighten to
the recommended torque.
| Fastening | Component | Ø | Value(daNm) |
|---|
| - | - | REVERSING LIGHT SWITCH | M14 | 2.3 ÷ 3.3 |
Connect the electrical connection to the
reversing lights switch.Connect the negative (-) battery terminal.Check the operation of the reversing light.
