2400644 - 5580H06 wiring of parking sensor system r r
Removing
(
Refitting
)
Position the vehicle on a lift
and raise it.1. Undo the rear bumper lower bolts.2. Slightly lower the bottom edge (2a) of the bumper and disconnect
the parking sensor electrical connection (2b).
2. Release the wiring retainers.3. Recover the wiring.
Refitting
(
Removing
)
Check that the wiring is undamaged
and that the individual conductors are firmly attached to the connections.If necessary, check the continuity.Position the wiring and secure it using
the retainers.Connect the electrical connections.Tighten the lower bumper bolts.Check that the parking sensors are working.
Removing
(
Refitting
)
Position the vehicle on a lift
and raise it.1. Undo the rear bumper lower bolts.2. Slightly lower the bottom edge (2a) of the bumper and disconnect
the parking sensor electrical connection (2b). 
