2400770 - 7025C40 fuel filler flap control motor - r+r and check lock supply line

Removing ( Refitting ) 1. Open the fuel flap.
If the opening motor does not work, use the emergency cord (1a) on the right side of the luggage compartment, after removing the lid (1b).
2. Apply a probe to the end of the cord (1b) to facilitate subsequent refitting.3. Undo the fuel cap.4. Undo the bolts.5. Withdraw the motorised flap striker.6. Retighten the fuel cap.
1. Disconnect the motor electrical connection

NameConnector
1Fuel flap lock gearmotor  N58 
2. Undo the bolts (2a) and remove the motor (2b).3. Release the emergency cord (3a) from the motor's retainer (3b).
Refitting ( Removing ) Check that the motor-striker assembly is not damaged.Connect the emergency cord to the retainer.Position the motor and secure with bolts.Connect the electrical connection.Undo the fuel cap.Position the motor-striker assembly and secure it using the bolts.Bring back the emergency cord with the probe.Retighten the fuel cap and close the flap.Check that the fuel flap is working properly.