The dipped headlamps activation and AUTO function (earth) signal
is sent to pin 2 of connector I of the Body Computer
M1 from
the steering column switch unit H5
The dipped headlamps are automatically activated
by the dusk sensor
K125 (signal via the A-BUS line to pin 7 of
connector D of M1);
The dusk sensor
K125 is supplied from
the INT line protected by fuse F49 of junction unit B2.
The Body Computer
M1
controls the
supply of the dipped headlamps sending an earth signal to the underdashboard
control unit
B2
- from pin 8 of connector F of M1 - which energizes
the relay T1: this supplies the dipped headlamps
F10
(left)
and
F11
(right). Each circuit is protected by a junction
unit
B2 fuse F13 for the left headlamp and F12 for the right
one.