The lighting of controls on front doors
H44 and H50 is managed
by driver side door control unit M66 and passenger door control
unit M67, supplied - at pin 11 of connector E - from a line protected
by fuse F32 of underfacia control unit B2, and connected via a CAN
line to Body Computer M1.
Similarly, the lighting of controls on rear
doors
H53
and
H54
is managed by boot control unit
M63
,
supplied - at pin B8 of connector A - from a line protected by fuse
F36 of underfacia control unit
B2
, and connected via a CAN
line to Body Computer
M1
.
The power supply with the side lights on
is provided by the Body Computer
M1 - pin 40 of connector E -
to the cigar lighter light P50 and pin 18 of connector H of M1 to
the air conditioning controls H80 and to the preparation for the
radio phone D75
See
E3580
PREPARATION FOR CELLULAR
TELEPHONE
.
The 'MODE' '+' and '-' controls for unit
H91
send analogue signals to the instrument panel E50, to pins 13 and
16 of connector B.
Pin 12 of connector B of
E50 emits a
dimmed power supply for control unit H91 for the controls in the
centre of the dashboard H35 and the air conditioning controls H80
in addition to those for the radio P20.
The Body Computer
M1 is connected, via
the CAN line, to the instrument panel E50 from which it receives
the 'light intensity adjustment' signal which is transmitted to
the radio connector and to the climate control system control unit
. See E1050 CAN CONNECTION LINES