2400025 - 0010T11 engine oil check level and top up

.

Check the engine oil level with the car level and engine off. Wait a few minutes (5 minutes) after the engine is turned off.

1. Remove the engine oil dipstick, clean and then fully reinsert. Remove and check the level is between the MIN and MAX limits. 2. If the oil level is close to or even below the MIN level, add the recommended oil through the oil filler opening up to the MAX mark.

When the engine oil level is over the MAX level following a normal check, adjust the level.

After topping up the engine oil, allow the engine to run for a few seconds, then turn off and leave for a few minutes before checking the level again.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA 20 K	-

The table shows the quantity for periodic replacement.

For the optimum operation of the engine in particularly harsh climatic conditions, use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA PERFORMER	-

The table shows the quantity for periodic replacement.