1. Undo the bolt securing the fuel filler pipe to the body.2. Undo the nuts securing the fuel vapour active charcoal filter.Lower the fuel filler pipe as necessary.3. Disconnect the rapid attachments for the fuel vapour recirculation
pipe.4. Release the fuel vapour recirculation pipe (4a) from the fastenings
(4b) to the body.5. Remove the fuel vapour active charcoal filter with integral pipes.
Refitting
(
Removing
)
Place the fuel vapour active charcoal filter
with integral pipes back in its housing.Connect the rapid attachments for the fuel
vapour recirculation pipes.Secure the fuel vapour recirculation pipe
to the body using the fastenings.Tighten the nuts securing the fuel vapour
active charcoal filter.Tighten the bolts fixing the fuel filler
pipe to the bodyshell.Connect the safety lead to the body using
the pin.
Proceed with removal
- 7055B45 right hand rear supplementary
wheel arch - r+r
.
Proceed with removal
- 4450B08 right rear wheel r r
.
Remove the car from the ramps.
Removing
(
Refitting
)
Position the vehicle on the ramp
Proceed with removal
- 4450B08 right rear wheel r r
Proceed with removal
- 7055B45 right hand rear supplementary
wheel arch - r+r1. Release the fuel filler cap safety device from the bodyshell.2. Undo the fuel filler pipe retaining bolts.
