2400166 - 1084A42 engine oil pressure warning light switch - r + r

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Name	Connector
1	Engine oil pressure sensor (switch)	K30

2. Undo and remove the engine oil pressure warning light switch. Refitting ( Removing ) Fit the engine oil pressure warning light switch in its seating and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	OIL PRESSURE W/L	M14	2.9 ÷ 3.5

Connect the electrical connection to the engine oil pressure warning light switch.Connect the negative (-) battery terminal.Remove the car from the ramps.