2400291 - 1820B49 Supply PIPE from (pump) - master cylinder R.R.

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 4450B02  left front wheel r r Proceed with removal  - 7055B90  Left front WHEEL ARCH LINER - R.R.Remove the cap on the bleed valve.Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.Loosen the bleed screw and let the hydraulic clutch system drain completely.1. Lift the retaining clip (1a) and disconnect the pipe from the master cylinder (1b), operating cylinder side.2. Release the master cylinder supply pipe (2a) from the bands (2b).3. Lift up the retaining clip (3a) and disconnect the pipe from the master cylinder (3b), master cylinder side and remove it. Refitting ( Removing ) Place the pipe from the master cylinder back in its housing, introduce it fully into the housing on the master cylinder and secur it using the retaining clip. Fasten the master cylinder supply pipe using the bands.Fit the pipe from the master cylinder fully home in its seat on the clutch operating cylinder and secure with the retaining clip. Proceed with refitting  - 0010T64  brake and or clutch fluid check level and top up as necessary . Proceed with refitting  - 0010T67  hydraulic clutch system bleed air . Proceed with refitting  - 7055B90  Left front WHEEL ARCH LINER - R.R. . Proceed with refitting  - 4450B02  left front wheel r r . Remove the car from the ramps.