2400309 - 2125C20 gearbox manual control support and lever - r + r for checking and replacement if necessary

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 5530B10  battery - r+r Proceed with removal  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.1. Press the release button (1a) and disconnect the gear selector cable (1b). 2. Disconnect the gear engagement cable.3. Remove the clips (3a) and release the gear selector and engagement cables (3b) from the mounting bracket.
1. Release the gear selector and engagement cables from the fastening on the steering box, then remove them from the engine compartment.
1. Undo the nuts fixing the exhaust manifold and catalytic converter to the exhaust silencer.2. Undo the bolt fixing the exhaust silencer front mounting bracket.
1. Undo the bolts (1a) and remove the gear lever mounting (1b) after having released it from the gear selector/engagement cable rubber mountings.
Proceed with removal  - 7040L37  gear lever plate - r r Proceed with removal  - 7040A65  passenger compartment box lock , one , r r Proceed with removal  - 7040A19  cushion padding - r r Proceed with removal  - 7040A28  TRIM on gearbox control panel - R.R. Proceed with removal  - 7040A30  Left instrument panel lower TRIM - R.R.1. Undo the nuts (1a) and the bolt (1b) and remove the manual gear control (1c).
1. At the bench, disconnect the gear selector and engagement cables from the gearbox lever.2. Remove the gear selector and engagement cables (2a) releasing the clips (2b) from the support.
1. Remove the gearbox lever (1a) and the housing (1b) from the support.
Refitting ( Removing ) Place the manual gearbox control lever and the housing in the housing on the support. Place the gear selector and engagement cables in their housings securing the clips to the support.Connect the gear selector and engagement cables to the manual gearbox control lever.Place the manual gearbox control assembly in its housing and secure it using the nuts and the bolt. Proceed with refitting  - 7040A30  Left instrument panel lower TRIM - R.R. . Proceed with refitting  - 7040A28  TRIM on gearbox control panel - R.R. . Proceed with refitting  - 7040A19  cushion padding - r r . Proceed with refitting  - 7040A65  passenger compartment box lock , one , r r . Proceed with refitting  - 7040L37  gear lever plate - r r . Place the gear lever mounting in its housing and secure it using the bolts.
Check that the gear selector/engagement cable rubber mountings are correctly positioned.
Tighten the bolt fixing the exhaust silencer front mounting bracket.Tighten the nuts fixing the exhaust manifold and catalytic converter to the exhaust silencer to the recommended torque.

FasteningComponentØValue(daNm)
-NutEXHAUST MANIFOLD WITH CATALYTIC CONVERTERM8(Silencer side) 2.3 ÷ 2.8
Fit the gear selector and engagement cables in the engine compartment and fasten the band to the steering box.Position the gear selector and engagement cables in the housings in the mounting bracket and secure them using the clips.Connect the gear engagement/selector cables.
Adjust the gear selector cable  - 2125C30  gear engagement cable - r r .
Proceed with refitting  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting  - 5530B10  battery - r+r . Remove the car from the ramps.