2400326 - 2710A54 l/h or r/h wheel end constant velocity joint (one) - r + r with drive shaft removed - including boot replacement
Removing
(
Refitting
)
Place the drive shaft in a vice fitted
with protective jaws.1. Remove the protective boot fastening bands.2. Move the protective boot back.3. Remove the wheel side constant velocity joint (3a) using the
tools (3b) and (3c) using pliers on the circlip (3d) at the same
time. | Name | Country |
|---|---|---|
| 3b | Counter weight | 1.847.017.000 |
| Name | Country |
|---|---|---|
| 3c | Adaptor | 1.860.889.000 |
Refitting
(
Removing
)
Clean the residual grease of the components
and check their condition.Fit a new protective boot on the driveshaft.Refit the constant velocity joint, wheel
side, back in its seating complete with a new circlip.Refit the gaiter back in its seating, then
fill it with the recommended grease. | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Grease (g) | WHEEL END CONSTANT VELOCITY JOINT | TUTELA STAR 500 | - |