3310A14 FRONT DISC BRAKES - R.R. - Fiat - IDEA - eLearn

2400331 - 3310A14 FRONT DISC BRAKES - R.R.

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 4450B12 front or rear wheels (two) - r+r Proceed with removal - 3310A32 FRONT BRAKE CALIPERS - R.R.1. Undo the bolts (1a) and remove the front brake caliper brackets (1b).

1. Unscrew the bolts (1a) and remove the front brake discs (1b).

Refitting ( Removing

) 1. Refit the front brake discs (1a) in their seatings and tighten the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Pin	FRONT BRAKE DISC.	M8	(Wheel hub side) 1.0 ÷ 1.4

1. Place the front brake caliper brackets (1a) back in their housings and fix them tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT BRAKE CALIPER BRACKET	M12	(Stub axle side) 10.0 ÷ 11.0

Proceed with refitting - 3310A32 FRONT BRAKE CALIPERS - R.R. . Proceed with refitting - 0010T64 brake and or clutch fluid check level and top up as necessary . Proceed with refitting - 0010T65 hydraulic brake system bleed air . Proceed with refitting - 4450B12 front or rear wheels (two) - r+r . Connect the negative (-) battery terminal.Remove the car from the ramps.