2400363 - 3330E10 FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R .

Removing ( Refitting ) Position the vehicle on the ramp FOR THE LEFT FLEXIBLE PIPE, proceed with the removal  - 4450B02  left front wheel r r . FOR THE RIGHT FLEXIBLE PIPE, proceed with the removal  - 4450B04  right front wheel r r . 1. Remove the protective cap on the brake caliper bleed valve. 2. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. 3. Loosen the bleed valve on the brake caliperWait for the brake-clutch reservoir to drain. 1. Remove the retaining spring.2. Under connectors (2a) and (2b) using tool (2c).

	Name	Country
2c	Box wrench for brake fittings	1.856.132.000

3. Remove the hose to the front brake caliper by releasing from the fastening on the damper. Refitting ( Removing ) 1. Refit the hose to front brake caliper (1a) and tighten connectors (1b) and (1c) to the specified torque using tool (1d).

	Fastening	Component	Ø	Value(daNm)
1b	Connector	HOSE TO FRONT BRAKE CALIPER	M10	(Brake caliper side) 1.4 ÷1.8

	Fastening	Component	Ø	Value(daNm)
1c	Connector	HOSE TO FRONT BRAKE CALIPER	-	(Rigid pipe side) 1.4 ÷ 1.8

	Name	Country
1d	Box wrench for brake fittings	1.856.132.000

2. Refit the retaining spring. Proceed with refitting  - 0010T64  brake and or clutch fluid check level and top up as necessary . Proceed with refitting  - 0010T65  hydraulic brake system bleed air . FOR THE LEFT FLEXIBLE PIPE, proceed with the refitting  - 4450B02  left front wheel r r . FOR THE RIGHT FLEXIBLE PIPE, proceed with the refitting  - 4450B04  right front wheel r r . Remove the car from the ramps.