2400782 - 7030B70 sun-roof control switch - r+r

Removing ( Refitting )  - 7040A44  facia lh side cover - r r - 7040A45  facia rh side cover - r r - 7065C34  l/h or r/h sun blind (one) - r+r (right and left)  - 7040E10  front courtesy light - r+r - 7040H08  oddment shelf on roof trim r r - 7040H40  Front. PILLAR COVER for third SIDE WINDOW (one), left or right - R.R. (right and left)  - 7040H36  central trim lower element - r r (right and left)  - 7040H38  central pillar upper element - r r (right and left)  - 7040H66  LEFT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R . - 7040H67  RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R . - 7040H42  rear pillar trim - r r (right and left)  - 7040E12  central courtesy light - r+r (right and left)  - 7065C30  interior l/h or r/h grab handle (one) - r+r (all)  - 7040H14  TRIM for centre roof support - R.R. - 7040H16  roof panel lining - r r1. Disconnect the electrical connection for the sun roof motor.

NameConnector
1Sun roof motor  N35 
2. Undo the fixing bolts (2a) and remove the sun roof moving motor (2b).
Refitting ( Removing ) Fit the motor in place.Tighten the bolts fixing the motor to the frame. Connect the electrical connection for the sun roof motor. - 7040H16  roof panel lining - r r - 7040H14  TRIM for centre roof support - R.R. - 7065C30  interior l/h or r/h grab handle (one) - r+r (all)  - 7040E12  central courtesy light - r+r - 7040H42  rear pillar trim - r r (right and left)  - 7040H67  RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R . - 7040H66  LEFT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R . - 7040H38  central pillar upper element - r r (right and left)  - 7040H36  central trim lower element - r r (right and left)  - 7040H40  Front. PILLAR COVER for third SIDE WINDOW (one), left or right - R.R. (right and left)  - 7040H08  oddment shelf on roof trim r r - 7040E10  front courtesy light - r+r - 7065C34  l/h or r/h sun blind (one) - r+r (right and left)  - 7040A45  facia rh side cover - r r - 7040A44  facia lh side cover - r r

After the battery has been disconnected or a fuse has blown, the system must be initialized again, proceeding as follows:

  • press the switch in the 'roof closed' position;
  • keep the switch pressed: the roof will close in stages;
  • keeping the switch pressed, wait for the roof to close fully until the motor is stopped;
  • release the switch.