2400911 - 7055B32 protective moulding on front bumper (1), lh or rh - r r
Removing
(
Refitting
)
1. Position a double layer of body tape (1a) along the entire perimeter
of the moulding (1b). 2. Use a plastic spatula to remove the moulding (1b), undoing perimeter
retainers (2a).
Refitting
(
Removing
)
Check that the moulding is
not damaged and that the retainers are intact.Place the moulding in position attaching
the retainers.Remove the protective adhesive tape.
Removing
(
Refitting
)
1. Position a double layer of body tape (1a) along the entire perimeter
of the moulding (1b). 2. Use a plastic spatula to remove the moulding (1b), undoing perimeter
retainers (2a).