2400913 - 7055B36 protective moulding on rear bumper - r r
Removing
(
Refitting
)
1. Position a double layer of body tape (1a) along the entire perimeter
of the moulding (1b). 2. Move the moulding (1b) releasing the retainers (2a).3. Recover the trim.
Refitting
(
Removing
)
Check that the moulding is
not damaged and that the retainers are intact.Place the moulding in position attaching
the retainers.Remove the protective adhesive tape.
Removing
(
Refitting
)
1. Position a double layer of body tape (1a) along the entire perimeter
of the moulding (1b). 2. Move the moulding (1b) releasing the retainers (2a).3. Recover the trim.