The front and rear bumpers are
made out of polypropylene and contain impact absorbing buffers.The wheel arch housings are protected by
plastic semirigid plastic shields that protect the inner part of
the compartment from external objects and offer partial acoustic
insulation while acting as a trim element for visible parts in the
wheel arch housing.The lower part of the engine compartment
is protected by a cover fixed to the chassis and the bumper and,
in the upper section there is a series of covers which can be easily
detached for maintenance and repair operations. The other elements (grilles, badges, trims,
etc.) are designed to enhance the appearance and spirit of the vehicle.
COMPOSITION
Absorbent buffers are fitted
on all car versions: two on the front strut connection beam and
three on the rear trim near middle of the bumper and the two rails. The buffers are made out of expanded polypropylene.
This material is resistent to temperature changes, ageing and deformation.