2398798 - J40 REARVIEW MIRROR ELECTRICAL ADJUSTMENT DOES NOT WORK

The door mirror does not move when the control is operated
The mirror is adjusted by the joystick on the driver's door panel
Results of the tests
1SERVICES RELAY CHECK (POWER CIRCUIT)All OKProblems metOperation
With the ignition ON, check that the additional rear current socket is working properly. The socket is located under the rear parcel shelf support, on the left hand side.It is possible, for example, to insert the cigar lighter and check that it heats upContinue to Step 4The additional rear current socket is also not workingContinue to Step 2
2SERVICES RELAY POWER SUPPLY CHECK (POWER CIRCUIT)All OKProblems metOperation
Check that the services discharge replay is correctly supplied by the battery.With the ignition ON, connect to the power supply for the relay from the Body Computer and check that the supply is sent to the relay when the electric windows are activated.Also check that the electrical connections between the Body Computer, the battery and the relay are not faulty See   E3032  DOOR MIRROR ADJUSTMENT
Do not disconnect the relay
Continue to Step 3No power supply from the batteryRestore the correct power supply to the relay. If necessary, replace the faulty components (if a fuse is involved, search for the cause of the problem first).
Supply enablement not provided by the Body ComputerReplace the Body Computer Op.   5505A32 
Connections faultyRestore the correct connections. See   E3032  DOOR MIRROR ADJUSTMENT
3RELAY OUTPUT CHECKAll OKProblems metOperation
With the ignition ON, connect to the relay output and check that the supply is sent to the electric windows circuit when the electric windows are activated.Also check that the connections between the services relay and the Driver's/Passenger Door Node are not faulty See   E3032  DOOR MIRROR ADJUSTMENT Continue to Step 4The power supply is not sent to the circuitReplace the services relay
Connections faultyRestore the correct connections. See   E3032  DOOR MIRROR ADJUSTMENT
4MIRROR MOVEMENT CIRCUIT CHECKAll OKProblems metOperation
The problem is due to the simultaneous presence of problems in the two rear view mirror circuits bearing in mind that the problems could be different for the two mirrorsSee table J41Fault persistsSearch for the fault starting from another symptom'
The door mirror does not move when the control is operated
The mirror is adjusted by the joystick on the driver's door panel
Results of the tests
1ELECTRICAL CONNECTIONS CHECKAll OKProblems metOperation
Check that both the power supply and earth electrical connections for the electric mirrors movement circuit are correct See   E3032  DOOR MIRROR ADJUSTMENT Continue to Step 2Connections faultyRestore the correct connections.
2JOYSTICK CHECKAll OKProblems metOperation
Check that the joystick is working properlyContinue to Step 3Joystick faultyReplace the door mirrors joystick Op. 7005R40
3MIRROR MOTORS CHECKAll OKProblems metOperation
Check that the mirror movement motors are working properlyContinue to Step 4Mirror motors faultyReplace the rear view mirror motor Op.   7005R36 
4CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer present End of diagnosisFault persistsSearch for the fault starting from another symptom'