2398808 - K10 DOORS OPEN CHECK NOT WORKING

The special warning light/symbol in the instrument panel is not displayed when one of the doors is opened. The interior lights do not work properly when one of the doors is opened
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation

Connect the EXAMINER diagnostic equipment and check the CAN NETWORK INFORMATION:

  • For inactive control units
  • For control units with errors
  • For control units with CAN errors
Continue to Step 1Presence of faults in the CAN network Continue as instructed by the tester
Impossible to converse with the Body ComputerContinue to Step 7
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the Examiner to the diagnostic socketCheck that there are no faults in the Body ComputerContinue to Step 2There are faults in the Body ComputerProceed in accordance with the instructions provided by the instrument
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Two-zone climate control systemKeeping the Examiner equipment connected to the diagnostic socket, check that there are no faults at the Driver's Door Node Continue to Step 3There are faults in the Driver's Door NodeProceed in accordance with the instructions provided by the instrument
Two-zone climate control system

Keeping the Examiner diagnostic equipment connected to the diagnostic socket check that there are no faults in:

  • Driver's/Passenger Door Nodes
  • Luggage Compartment Node
Continue to Step 3There are faults in the Driver's Door NodeProceed in accordance with the instructions provided by the instrument
There are faults in the Luggage Compartment NodeProceed in accordance with the instructions provided by the instrument
3CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keeping the Examiner diagnostic equipment connected to the diagnostic socket check that there are no faults at the Instrument PanelContinue to Step 4There are faults in the instrument panelProceed in accordance with the instructions provided by the instrument
4CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keeping the Examiner connected to the diagnostic socket, check the operation of the warning light in active diagnosis Continue to Step 5Warning light not workingReplace instrument panel Op. 5560B11
5CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Two-zone climate control systemCheck the connections between the Body Computer, Driver's Door Node, instrument panel and switches in the locks See   E3040  CENTRAL LOCKING Continue to Step 6Connections not correctRestore the correct connections: See   E3040  CENTRAL LOCKING
Two-zone climate control systemCheck the connections between the Body Computer, Driver's/Passenger Door Nodes, Luggage Compartment Node, instrument panel and switches in the locks See   E3040  CENTRAL LOCKING Continue to Step 6Connections not correctRestore the correct connections: See   E3040  CENTRAL LOCKING
6SWITCH CHECKAll OKProblems metOperation
Check the operation of the switches in the locksContinue to Step 7Front door lock switch defectiveReplace the lock Op.   7005N21 
Rear door lock switch defectiveReplace the lock Op.   7010N21 
Luggage compartment lock with faulty switchReplace the lock Op.   7015B10 
7CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer present with any of the doors openEnd of diagnosisThe fault persistsReplace the Body Computer Op.   5505A32