2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Undo the nuts (1a) and remove the exhaust manifold heat shield
(1b) complete with engine lifting bracket (1c).
Refitting
(
Removing
)
Place the exhaust manifold heat shield,
complete with engine lifting bracket, back in its housing and fix
it using the nuts.Replace the air filter, complete with air
flow meter, in its housing.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.Connect the negative (-) battery terminal.
Removing
(
Refitting
)
Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-). 
