1088B32 ENGINE COOLING RADIATOR SUPPORT BEAM - R R - Fiat - IDEA - eLearn

2400173 - 1088B32 engine cooling radiator support beam - r r

) Position the vehicle on the ramp Proceed with removal Proceed with removal - 7055A43 central front grille - r r Proceed with removal - 7210E10 R.R. FRONT BUMPER1. Position a hydraulic jack under the radiator lower crossmember.Support the engine cooling radiator/air conditioning condenser assembly appropriately.2. Undo the bolts securing the radiator bottom crossmember to the bodywork.3. Lower the hydraulic jack and remove the lower radiator crossmember.

While lowering the hydraulic jack, check that the turbocharging air-air intercooler pins are released from the lower radiator beam.

Refitting ( Removing

) Using the hydraulic jack, refit the lower radiator crossmember.Tighten the bolts securing the radiator bottom crossmember to the bodywork.Remove the hydraulic jack from underneath the lower radiator crossmember. Proceed with refitting - 7210E10 R.R. FRONT BUMPER . Proceed with refitting - 7055A43 central front grille - r r . Proceed with refitting . Remove the car from the ramps.