2400632 - 5580C14 air bag ecu - r+r

Before removing and refitting the control unit, carry out the following preliminary operations. Place the ignition key in the OFF position and extract it;Disconnect the battery leads and insulate.Wait for 10 minutes before continuing.
FOLLOW ALL THE RECOMMENDED SAFETY RULES (see 5580C - Precautions).
Removing ( Refitting )  - 7040A65  passenger compartment box lock , one , r r (right and left) 1. Working under the facia on the right, move the flap of carpet (1a) slightly and disconnect electrical connetions (1b) and (1c) of control unit (1d).

NameConnector
1bAir bag control unit  M60B 

NameConnector
1cAir bag control unit  M60A 
2. Undo the bolts.3. Recover the control unit.
Refitting ( Removing ) Follow these precautions.
Do not strike the control unit and do not connect the electrical connection to the control unit before having fixed the control unit correctly. Make sure that the battery is disconnected.
If the control unit is being replaced, remove the removable part of the adhesive label from the new control unit and place it in a special file containing the vehicle details (model, registration date, chassis number) and the serial number of the old control unit. This file should be kept for future checks.
1. Position the control unit (1a). Make sure that the arrow (1b) on the upper surface of the control unit is pointing in the direction of travel. 2. Tighten the bolts to the recommended torque.

FasteningComponentØValue(daNm)
2BoltAIR BAG CONTROL UNITM60.8
Connect the electrical connections.Arrange the mat. - 7040A65  passenger compartment box lock , one , r rConnect the battery.Using the Examiner, check that the system has not picked up errors during the operation.