2400028 - 0010T21 coolant check density and top up if necessary

.

Carry out this check with the vehicle on a flat surface, several minutes after the engine has been switched off.

When the engine is hot, do not remove the tank cap; there is a danger of burn injury.

1. Check that the coolant level is between the MIN and MAX marks on the expansion tank.2. If necessary, top up the level by unscrewing the cap and adding coolant.

	Type	Component	Name	Qty.
2	Fluid	"PARAFLU" ANTI-FREEZE FLUID	PARAFLU UP	-

The table shows the total quantity of coolant contained in the circuit with the level on the MAX notch on the reservoir.

Never exceed the MAX level.

Fully tighten the cap on the engine coolant reservoir.Start the engine and let it idle for a few minutes.Turn off the engine and wait for a few minutes.Recheck that the engine coolant level is between the MIN and MAX marks found on the coolant reservoir.