1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Fiat - IDEA - eLearn

2400058 - 1008B10 power unit front mount (timing side) flexible block - replace

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	K41

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Loosen the band and disconnect the coolant return pipe from the engine coolant reservoir.2. Loosen the band and disconnect the supply pipe, reservoir side, from the engine coolant reservoir.3. Undo nut (3a), bolt (3b) and remove engine coolant reservoir (3c).

Proceed with removal - 7055A43 central front grille - r r1. Fit a suitable bracket (1b) using the bolt (1a) shown securing the camshaft housing.

This bracket is used exclusively for balancing the power unit.

2. Fit the tool (2a), complete with support mountings (2b).

	Name	Country
2a	Crossmember	1.870.595.000

	Name	Country
2b	Support mountings	1.870.650.000

3. Fit the tools (3a) and (3b), then connect them via the links (3c) to the bracket previously fitted and to the exhaust manifold.

	Name	Country
3a	Crossmember	1.860.851.000

	Name	Country
3a	Vertical support	1.871.001.300

1. Undo the nut fixing the air conditioning system pipes mounting bracket.2. Undo the nuts (2a) and (2b), then remove the timing side power unit support flexible mounting (2c).

Refitting ( Removing

) 1. Place the timing side power unit support flexible mounting (1a) in position and secure it tightening the nuts (1b) and (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Nut	FRONT RUBBER MOUNTS	M10	(Rigid support side) 4.5 ÷ 5.5

	Fastening	Component	Ø	Value(daNm)
1c	Nut	FRONT RUBBER MOUNTS	M10	(Bodyshell side) 4.1 ÷ 5.0

2. Tighten the nut securing the air conditioning system pipe bracket to the power unt flexible mounting block, timing side.

Remove the safety tools used for supporting the power unit.

	Name	Country
-	Crossmember	1.870.595.000

	Name	Country
-	Support mountings	1.870.650.000

	Name	Country
-	Crossmember	1.860.851.000

	Name	Country
-	Vertical support	1.871.001.300

Remove the bracket and tighten the bolt fixing the camshaft housing to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CYLINDER HEAD EXTENSION	M7	(Lower cylinder head side) 1.8

Proceed with refitting - 7055A43 central front grille - r r . Refit the coolant reservoir in its seating and secure with the nut and bolt.Connect the engine coolant reservoir supply pipe and tighten the band.Connect the coolant return pipe to the engine coolant reservoir and tighten the band.Replace the air filter, complete with air flow meter, in its housing.Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.Connect the electrical connection to the air flow meter.Connect the negative (-) battery terminal.