1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GUAGE CONTROL - R + R - Fiat - IDEA - eLearn

2400114 - 1040A70 submerged pump assembly complete with level guage control - r + r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Lift the rear seat cushion lift the floor covering to gain access to the fuel pump flap.2. Unscrew retaining bolts (2a) and remove protective cover (2b).3. Disconnect the electrical connection from the immersed pump assembly complete with gauge.

	Name	Connector
3	Fuel pump and sender unit	N40

Undo the fuel filler cap and remove it to discharge the pressure in the system.4. Disconnect the rapid connectors (4a) and (4b) for the fuel supply and return pipes from the submerged pump assembly.

1. Undo the right nut (1a) fixing the immersed pump assembly complete with gauge using the tool (1b).

	Name	Country
1b	Key	1.870.736.000

2. Remove the immersed pump assembly complete with gauge. Remove the O-ring.

Refitting ( Removing

) Refit the o-ring in its seat on the fuel tank collar and ensure it is correctly positioned.1. Place the submerged pump assembly complete with gauge back in its housing.

Fit the submerged pump assembly complete with gauge so that the arrow stamped on the cover is in line with the one on the tank.

2. Undo the ring nut (1a) securing the submerged pump assembly complete with gauge using tool (2b).

	Name	Country
2b	Key	1.870.736.000

Disconnect the rapid attachment for the fuel supply pipe from the immersed pump assembly.Connect the electrical connection to the immersed pump assembly complete with gauge.Place the protective cover back in its housing and fix it using the bolts.Put the floor trim back in its place.Connect the negative (-) battery terminal.