2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.3. Undo the bolts (3a) and remove the air flow meter (3b).
Refitting
(
Removing
)
Refit the air flow meter in its seating
and secure it with its bolts.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.Connect the negative (-) battery terminal.
Removing
(
Refitting
)
Ensure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-). 
