1088E20 RESISTOR FOR RADIATOR COOLING FAN - R + R - Fiat - IDEA - eLearn

2400270 - 1088E20 resistor for radiator cooling fan - r + r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	K41

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Disconnect the electrical connections from the engine cooling fan resistor.

	Name	Connector
1	Engine fan adjustment resistor	O10

2. Undo the bolts (2a) and remove the resistor for the engine cooling fan (2b).

Refitting ( Removing

) Refit the engine cooling fan resistor in its seat.Connect the electrical connections to the resistor for the engine cooling fan.Replace the air filter, complete with air flow meter, in its housing.Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.Connect the electrical connection to the air flow meter.Connect the negative (-) battery terminal.