2400319 - 2710A24 differential end constant velocity joint (one) l/h or r/h - r + r with drive shaft removed - includes boot replacement
Removing
(
Refitting
)
1. Remove bands (1a) and (1b) securing the protective gaiter.2. Clean the grease off the inside of the constant velocity joint
and remove the circlip.3. Remove the differential side constant velocity joint4. Remove the protective boot.
Refitting
(
Removing
)
Wash the joint thoroughly using diesel
or petrol, and visually check that there are no signs of seiaure
or scoring on the balls and their seats.Refit a new gaiter in its seating.Refit the constant velocity joint, differential
side, back in its seating complete with a new circlip.Refit the gaiter back in its seating, then
fill it with the recommended grease. | Type | Component | Name | Qty. |
|---|---|---|---|---|
| - | Grease | WHEEL END CONSTANT VELOCITY JOINT | Tutela STAR 500 | - |