2400555 - 5505C40 cabin wirirng - r r

For precise identification of the electrical connections, see Wiring Diagrams section.

Removing ( Refitting ) 1. Disengage the retainers (1a) of the interior compartment front trim (1b).2. Move aside the front trim, to gain access to the bulkhead area. 1. Working in the area of the rear seats, lift up the sound insulation.2. Undo the bolts for the fuel tank housing cover.3. Remove the cover. Open the bonnet lid.Place the vehicle on a lift.1. Disconnect all the wiring electrical connections.2. Release the wiring from the retainers and remove it. Refitting ( Removing ) Check that the wiring is undamaged and that the individual conductors are firmly attached to the connections.If necessary, check the continuity.Position the wiring and secure it using the various retaining bands.Connect the electrical connections.Refit the fuel tank housing cover and secure it using the bolts.Position the sound insulation.Position the front trim attaching the retainers.