2400683 - 7005E50 front side door pillar trim (one) lh or rh - r r
Removing
(
Refitting
)
- 7005E12 corner cover of one
front side door, lh or rh r r - 7005M14 ELECTRIC WINDOWS, REAR VIEW MIRRORS and CENTRAL LOCKING
SWITCH unit on driver's front door - R.R. - 7005E08 front side door interior panel r r - 7005D26 front side descending window glass scraper (outer)
r r - 7005D18 front side door descending window glass channel r
r - 7005D19 (One), LOWERING WINDOW CHANNEL left or right for
front side door on vehicles with anti-crush sensor - R.R.
(alternatively)
- 7005D33 channel of door descending glass inner guide (one)
lh or rh on front side door - r r - 7005R10 manually controlled door mirror (one) - r+r
(only
for front pillar trim)
- 7005R30 electrically controlled door mirror (one) - r+r
(alternatively)
1. Warm up the trim with hot air, then remove it.
Refitting
(
Removing
)
Use a new trim piece.1. Thoroughly clean any adhesive residues from the fitting area
using heptane. Bathe the fitting area in soapy water. 2. Remove the protection from the adhesive side of the trim, then
place it in position. The soapy water facilitates the sliding needed
for correct positioning. 3. Using a sponge, press on the lining to remove any air bubbles.