2400739 - 7010N20 rear side door lock motor/catch assembly - r r with door panel and support frame removed
Removing
(
Refitting
)
1. Undo the catch retaining bolts.2. Working inside the door frame, release the cover.3. Disengage the control cable (3a) from the retainers (3b).4. Remove the catch.
1. If necessary, remove the rod (1a) after releasing the retainers
(1b).
Refitting
(
Removing
)
Check that the assembly is
not damaged.Fit the link and engage the retainers.Engage the control cable on the retainers.Fit the cover.Fit the lock assembly and tighten its bolts.
Removing
(
Refitting
)
1. Undo the catch retaining bolts.2. Working inside the door frame, release the cover.3. Disengage the control cable (3a) from the retainers (3b).4. Remove the catch.
