2400758 - 7025A10 bonnet lid - square

Lift the bonnet lid.1. If necessary, adjust the buffer blocks.2. If necessary, adjust the lock position.  Refer to op.. 7025A34  bonnet lid lock (one) - r+r or repair .
1. If necessary, undo the hinge bolts and adjust the bonnet position. The arrows indicate possible movements. Tighten the hinge bolts.

FasteningComponentØValue(daNm)
-BoltBONNET LIDM60.8
If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below. Refer to op.. 5050B34  windscreen wiper arm/s complete with blade - r+r Refer to op.. 7210E22  R.R. WINDSCREEN BASE TRIM Refer to op.. 7035A54  WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R.1. Loosen the bolts with nut (1a) securing the hinges (1b) and adjust the position until the bonnet lid is aligned. The arrows (1c) indicate the possible movements. 2. Tighten the bolts and nut.

FasteningComponentØValue(daNm)
2NutBONNET LID HINGESM82.4
Touch up the paintwork in the hinge area. Refer to op.. 7035A54  WINDSCREEN BASE LOWER SUPPORT (one), left or right for attaching windscreen protective grille - R.R. Refer to op.. 7210E22  R.R. WINDSCREEN BASE TRIM Refer to op.. 5050B34  windscreen wiper arm/s complete with blade - r+r