2401008 - 1088C20 water pump - r + r with engine removed
Removing
(
Refitting
)
1. Use a spanner on the moving tensioner (1a) and remove the engine
components single drive belt (1b).2. Undo the nuts (2a) and remove the water pump (2b) complete with
gasket.
Refitting
(
Removing
)
1. Place the water pump (1a), complete with gasket, back in its
housing and secure it tightening the bolts (1b) to the recommended
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Nut | COOLANT PUMP | M6 | (Upper engine crankcase side) 0.8 ÷ 1.0 |
