2401144 - E3045 BOOT AND FUEL FLAP OPENING - Functional description

Functional description

The 'boot open' signal is sent by the switch located in the handle near the number plate light assembly F52 to pin 35 of connector E of the Body Computer M1. The RF aerial receiver P93 sends the Body Computer M1 the open/close signal for the doors and also the boot, in accordance with the logic described previously, to pins 21 and 31 of connector B See E3040 CENTRAL LOCKING . The Body Computer M1 implements the boot release function in accordance with the control strategy described - pin 11 of connector F via the line supplied by fuse F38 of the underfacia junction unit B2, pin 18 of connector D - to control operation of boot catch motor N57. The boot unlocking function, inside the Body Computer M1 pin 1 of connector F; also has a dedicated earth connection: pin 20 of connector F. The geared motor N57 is supplied until the opening of the boot is detected: the boot not properly closed signal is sent to the switch I11 which is connected to pin 24 of connector E.

the contact in question signals the boot not properly closed condition; the switch is fitted with another contact which signals the boot open condition, this contact is used for the boot light function.  See E2520  GLOVE COMPARTMENT LIGHT - LUGGAGE COMPARTMENT LIGHT - SUN VISOR LIGHT