4130A10 POWER STEERING BOX - R+R - CHECK TOW-IN IF NECESSARY SEPARATELY - INCLUDES BLEEDING - Alfa - 166 - eLearn

3314632 - 4130A10 power steering box - r+r - check tow-in if necessary separately - includes bleeding

) Place the car on a ramp with the wheels perfectly straight.Mark the position of the steering wheel in relation to the upper steering column shroud. - 7040D12 engine front side cover (one) lh or rh - r r (left). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). 1. Undo the bolt (1a) and remove the bulkhead protection on the left side.2. remove the power steering fluid reservoir cap and drain the fluid using a suitable syringe.

1. remove the power steering fluid reservoir cap and drain the fluid using a suitable syringe.

1. Remove the rubber protector (1a) and the accelerator pedal travel stop (1b).

1. Move aside the floor carpet, unscrew the nuts (1a) and remove the steering column universal joint guard (1b).2. Undo the bolt securing the steering column to the power steering box.

The bolt is pretreated and cannot therefore be refitted.

Push back the steering column joint.Remove the fail-safe device from the steering box pinion.

1. Undo bolts (1a) and remove protection (1b).

1. Unscrew the connector (1a) and disconnect the outlet hose from the power steering box (1b), steering box side.2. Undo the bolt securing the bracket for the delivery pipe from pump to steering box.

- 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r . - 1064A44 left hand or right hand sleeve (one) joining left hand or right hand cylinder head to turbocharger - r+r (right). 1. Undo the connector and disconnect the delivery pipe from pump to power steering box, steering box side.2. Undo the bolts securing the steering box to the front suspension subframe.

1. Undo the nuts securing the power steering heat exchanger pipe to the body shell.

1. Remove the power steering box, releasing it from its pipes and withdrawing it through the right wheelarch.

Refitting ( Removing

) Refit the power steering box in its seating, working from the front right wheelarch.Tighten the nuts securing the power steering heat exchanger pipe to the body shell.1. Tighten the bolts securing the power steering box to the front suspension subframe to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	POWER STEERING BOX	M12	Front suspension frame side 10.5 - 11.5

2. Connect the delivery pipe from pump to power steering box, steering box side, and tighten its connector to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power steering box side) 3.4 ÷ 3.8

- 1064A44 left hand or right hand sleeve (one) joining left hand or right hand cylinder head to turbocharger - r+r (right). - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r .