3315102 - 7010N20 rear side door lock motor/catch assembly - r r with door panel and support frame removed

Removing ( Refitting )  - 7010A04  rear side door water guard protection - r r or arrange with door panel removed1. Disconnect the interior handle mechanism cable (1a) and the safety device mechanism link (1b) from the lever and control mechanism.2. Release the link and cable from the retaining clips on the door.3. Unscrew the bolts retaining the catch to the door.4. Disconnect electrical connection (4a) and remove catch (4b) complete with link and cable.

NameConnector
4aCAE control unit  M55 

NameConnector
-Data not available yetM56
Refitting ( Removing ) Check the condition of all catch components.Fit the catch inside the door and connect the catch electrical connection.Tighten the three bolts retaining the catch to the door.

FasteningComponentØValue(daNm)
-BoltREAR DOOR LOCK MECHANISMM81.4
Secure the link and cable to the door using three retaining clips.Connect the cable to the inner handle. Connect the link to the safety device.Check the catch is working properly by opening and closing the door a few times. - 7010A04  rear side door water guard protection - r r or arrange with door panel removed