3315768 - E8010 DIAGNOSTIC MULTIPLE CONNECTOR - Functional description

Functional description

Tester connection R10 is supplied directly by the battery (maxifuse CENTR of B5 ) via fuse F17 of junction unit B1 . Pins 4 and 5 are earthed. The pins are connected to the ABS control unit M50 - pin 11 - (  See E7020  ABS ). Pin 3 is connected to airbag control unit M60 - pin 9 - (  See E7030  AIRBAG ). Pin 11 is connected to alarm control unit M30 - pin 6 of connector A - and remote control receiver M35 - pin 2 - (  See E7015  ALARM ). Pin 8 is connected to Code control unit M20 - pin 5 - (  See E7010  CODE ). Pin 7 is connected to engine management control unit M10 via a dedicated line.

Functional description

Pin 9 is connected via a single line to numerous control units and electronic devices:

• to instrument panel E50 : pin 1 of connector C ( See E4010  INSTRUMENT PANEL);
• to electronic Check device M45 : pin 11 of connector C;
• to additional heater control unit M75 pin 2 of connector B ( See E6015  ADDITIONAL HEATER).
• to ICS Display E60 - pin 1 of connector B: this collects - in a single test channel - diagnostic information on display E60 , and also information on control unit M70 pin 13 of connector C ( See E6020  AIR CONDITIONING) and navigator control unit M90 .