3315770 - E8010 DIAGNOSTIC MULTIPLE CONNECTOR - Functional description (Right hand drive, Automatic transmission)

Functional description

The tester connection R10 is supplied, at pin 16, directly by the battery (maxifuse CENTR of B5 ), via fuse F17 of junction unit B1 . Pins 4 and 5 are earthed. Pin 1 is connected to the ABS control unit M50 - pin 11 - (  See E7020  ABS ). Pin 3 is connected to airbag control unit M60 - pin 9 - (  See E7030  AIRBAG ). Pin 11 is connected to alarm control unit M30 - pin 6 of connector A - and remote control receiver M35 - pin 2 - (  See E7015  ALARM ). Pin 8 is connected to Code control unit M20 - pin 5 - (  See E7010  CODE ). Pin 7 is connected to engine management control unit M10 via a dedicated line.

Functional description

pin 39 of connector C;

Functional description

Pin 12 is connected to EAT control unit M55 via a dedicated line.

Functional description

Pin 9 is connected via a single line to numerous control units and electronic devices:

• to instrument panel E50 : pin 1 of connector C ( See E4010  INSTRUMENT PANEL);
• to electronic Check device M45 : pin 11 of connector C;
• to ICS Display E60 pin 1 of connector B: this collects - in a single test channel - diagnostic information on display E60 , and also information on control unit M70 pin 13 of connector C ( See E6020  AIR CONDITIONING) and navigator control unit M90 .
• to xenon headlamps control unit M87 : pin 11.