3308649 - I05 DIPPED HEADLAMPS NOT WORKING
With the ignition on, when the dipped beam circuit is activated, the 'lights fault' warning light on the instrument panel comes on for about 15 seconds and then goes out.| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation | 
|---|---|---|---|---|
| First check the dipped beam light bulbs | Continue to Step 1 | Blown bulbs | Replace bulbs | |
| 1 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation | 
| Switch on the dipped beam headlamps and check that they come on ( See E2011 DIPPED HEADLAMPS ) | Continue to Step 2 | Dipped beam headlamp relay faulty | Replace dipped beam headlamp relay Op. 5540B04 | |
| Wiring broken | Restore connections | |||
| Faulty earth | Repair earth | |||
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| CHECKING WITH DIAGNOSTIC EQUIPMENT 
 | Continue to Step 3 | Fault detected | Continue following the instructions for the diagnostic equipment | |
| 3 | HECK ON CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |