1088E11 FANS WITH SINGLE ENGINE DUCT - R+R - Alfa - 166 - eLearn

3314289 - 1088E11 fans with single engine duct - r+r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with the removal - 7040D12 engine front side cover (one) lh or rh - r r (Right and left sides). Proceed with removal - 7040D30 engine bay front beam cover - r r . Proceed with removal - 1016A10 sound-proofing cover - r + r . 1. Disconnect the electrical connections from the engine fan motors.

	Name	Connector
1	Engine electric fan motor	N11

	Name	Connector
1	Engine electric fan motor	N12

2. Disconnect the electrical connections from the resistors for the engine cooling fans and move the electrical wiring aside.

	Name	Connector
2	Engine fan adjustment resistor	O10

	Name	Connector
2	Engine fan adjustment resistor	O12

3. Undo the bolts (3a) and remove the fans with the single cooling duct (3b).

Refitting ( Removing

) Place the fans with the single engine cooling duct back in their housings and secure them using the bolts. Connect the electrical connections to the engine cooling fan resistors.Connect the electrical connections to the engine fan motors. Proceed with refitting - 1016A10 sound-proofing cover - r + r . Proceed with refitting - 7040D30 engine bay front beam cover - r r . Proceed with the refitting - 7040D12 engine front side cover (one) lh or rh - r r (Right and left sides). Connect the negative (-) battery terminal.