2110C50 GEAR SELECTION AND ENGAGEMENT UNIT - R R - Alfa - 166 - eLearn

3314482 - 2110C50 gear selection and engagement unit - r r

) Position the car on the ramp. Proceed with removal - 1016A10 sound-proofing cover - r + r . Proceed with the removal - 7040D12 engine front side cover (one) lh or rh - r r (Right and left sides). Proceed with removal - 7040D30 engine bay front beam cover - r r . Proceed with removal - 1048B22 air delivery sleeve from heat exchanger to intake manifold - r + r . Proceed with removal - 4450B02 left front wheel r r . Remove the protective cap on the brake caliper bleed valve. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Loosen the bleed valve on the brake caliper and wait for the brake-clutch reservoir and lines to drain.1. Disconnect the electrical connection from the reversing lights switch.

	Name	Connector
1	Reversing light control	I20

2. Disconnect the gear selector and engagement cables3. Undo the bolts (3a) and remove the gear selector and engagement unit (3b).

Lift up the gear selection and engagement unit slightly and rotate it through 180 degrees before removing it completely.

Refitting ( Removing

) 1. Place the gear selection and engagement unit (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	-	-	-	-

2. Connect the gear selector and engagement cables.3. Connect the electrical connection to the reversing lights switch.

Proceed with refitting - 0010T64 brake and or clutch fluid check level and top up as necessary . Proceed with refitting - 0010T65 hydraulic brake system bleed air . Proceed with refitting - 4450B02 left front wheel r r . Proceed with refitting - 1048B22 air delivery sleeve from heat exchanger to intake manifold - r + r . Proceed with refitting - 7040D30 engine bay front beam cover - r r . Proceed with the refitting - 7040D12 engine front side cover (one) lh or rh - r r (Right and left sides). Proceed with refitting - 1016A10 sound-proofing cover - r + r . Remove the car from the ramps.