3315608 - E3032 DOOR MIRROR ADJUSTMENT - Functional description (Right hand drive)

Functional description

The two-way switch controlling mirrors H31 operates electric motors located in the right and left electrically-operated door mirrors P60 and P61 respectively. The switch is supplied when the ignition is turned on (INT/A) from fuse line F5 of junction unit B1 to pins 1 and 4 of H31 , while pin 2 is earthed. The mirror is adjusted by operating the switch in one or other directions. Positive and earth signals are then sent to one of the two motors to determine the direction of rotation. The motors that govern vertical position are connected to pins 2 of connector A of mirrors P60 and P61 . The motors that govern horizontal position are connected to pins 3 of the same connectors. According to the selector position, either the left motors (output signals from pins 8 and 9 of control H31 ) or the right motors (output signals from pins 7 and 10 of H31 ) are connected; the common supply comes from pin 3 and is connected to pin 1 of connector A of P60 or P61 . The mirrors are folded down by operating mirror control switch H31 : pins 1 and 2 of connector D of P60 and P61 . they are connected respectively to pins 11 and 5, and pins 12 and 6 of mirror control H31 . Switch H31 is lit by ignition-operated power source (INT/A) from the line of fuse F5 of junction unit B1 . The electrochromatic interior rear view mirror P65 contains an electronic device that controls the mirror's automatic antiglare function. Device P65 is supplied by ignition-operated line (INT/A) of relay R1 protected by fuse F9 . When a reverse engagement signal (  See E2022  REVERSING LIGHTS ) is received, the antiglare function is disabled.