3315330 - 7210A35 R.R. FRONT SIDE PANEL (assembly)

Removing ( Refitting )  - 7210A16  R.R. WING LOWER CROSSMEMBER .  - 7210A60  R.R. FRONT PILLARCheck if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges).Straighten the body if necessary. 1. Use a pneumatic saw to cut along the lines shown in the figure.2. Cross-section of key area as a guide to allow the operator to adjust cutting position and depth in order to avoid damage to the underlying panels.3. Remove the front side panel cut edge. 1. Drill out the weld spots.2. Use a chamfering machine to remove the weld spots.3. Remove the front side panel cut edge. 1. Make equidistant holes as shown in the figure.Straighten the panel edges using a mallet and profiled stake.Use a grinding wheel to remove the weld spot residues.2. Apply electric weld paint finish to newly-treated edges. 1. Make a hole as shown in the figure.Use a rotary brush to remove the corrosion-proofing from the areas shown in the figure.2. Apply electric weld paint finish to the panel edges shown in the figure. Refitting ( Removing ) 1. Position the front side panel correctly on the car using a template and self-locking clips.2. Position the front side panel connection beam.Check it is properly aligned. Remove the side panel connection beam.1. Use a spot welder to weld the areas shown in the figure.2. Use a spot welder to weld the areas shown in the figure. 1. Use a MIG welder to fill the areas shown in the figure. Correct any deformations in the panel using a profiled stake and mallet.1. Use a grinding wheel to remove weld spot residues.Use a rotary brush to clean the treated areas. Apply rust-proofing treatment to the newly welded areas.1. Seal the joint lines between the part and the car using sealant.2. Reapply PVC treatment to the areas indicated in the figure.3. Apply sound-deadening panels to the area shown in the figure.Apply paint.4. Apply wax oil inside the holes shown in the figure.  - 7210A60  R.R. FRONT PILLAR - 7210A16  R.R. WING LOWER CROSSMEMBER